Tips & Tricks to Fix iPhone Won’t Hard Reset

Possible Way to Fix This Issue via iTunes

You may also be able to fix an iPhone that won't hard reset by putting the device in recovery mode and restoring or updating it in iTunes. Here's how to do that:

Step 1: Open iTunes on your computer and then connect one end of the USB/lightning cable to the computer.

Step 2: Now use this procedure to put the device in recovery mode:

iPhone 8 and Later - Turn off the device and then while holding the power (side) button, connect the device to the computer. Keep holding the button until you see the recovery mode screen on the device

iPhone 7 and 7 plus - Turn off the device and while holding the Volume down button, connect the device to the computer. Keep holding the button until the recovery mode screen appears.

iPhone 6 or earlier - Turn off the device and hold the home button while connecting the device to the computer. Keep holding the home button until the recovery mode screen appears.

Step 3: iTunes will detect the device and prompt you to either "Update" or "Restore" the device. click on "Update" first and iTunes will install the latest version of the firmware.

If this doesn't work, repeat the procedure again and this time, select "Restore" to fix the device.


Option 3. Check Hardware Issues Via Apple Support Center

The above solutions can only be helpful if a software issue is causing the problem. When a broken button or any other kind of hardware damage is causing the problem, you may need to bring it to an Apple store so Apple's technicians can take a look at the device.

Charges may apply if the device is no longer on warranty, but this is your best option since Apple technicians will be able to get to the bottom of the problem very quickly. If you chose to go to the Apple Store for help, make an appointment to avoid waiting too long.
Tip. Prevent the iPhone Won't Hard Reset Issue - Update iPhone

Once you have successfully repaired the device using one of the methods above, the next best thing to do is to take steps to avoid this issue. The best way to prevent this problem from happening again is to update the iOS to the latest version. An update can eliminate some of the bugs and settings that can cause problems with the device.

To update your iPhone to the latest version, follow these simple steps:

Step 1: Open Settings on your device and then tap "General".

Step 2: Tap on "Software Update" and if there is an update, tap "Download and Install". Keep the device connected to the power source until the update is complete.



Conclusion

When an iPhone won't hard reset, the above solutions can be very effective. Choose one that you can trust depending on the reason why your device won't hard reset. As usual, we love to hear from you, so let us know if one of the solutions above works.Also Read:h33t proxy

iPhone Apps Stuck on Downloading? Here are 7 Tips to Fix It

“I can't seem to download anything from the App Store on my iPhone X. Everyone I try gets stuck on "Waiting". I've tried leaving it 12 hours+, no luck. I tried signing in with both mine and my girlfriend's AppleID, same problem. I tried turning Automatic Downloads on and off, both ways, no luck.”
Have you ever faced a situation wherein your apps tend to get stuck in the download mode? This is a very troubling situation and you might be itching to know as to how you can fix it. Sometimes, the apps have almost downloaded but then you get an error in the end. This situation can be extremely irritating. In this article, we will be showing you the multiple steps which can be used which should help you in fixing this baffling issue. By the end of this article, your apps should resume downloading smoothly. So, let us see what they are?

Tip 1: Check your working data connection

When you are downloading the apps, it is important to ensure that you have a working internet connection. So, you can load your web browser and see if the web page opens. This is a right test to see if the data is connected. If not, you need to turn the mobile data on. Try and resume the app download after that.
Tip 2. Delete the app and reinstall it

iOS allows you to delete apps even when it is being installed. You need to hold down the app icon and the apps will begin to wiggle. All you have to do is tap on the X icon which will be found on the upper left corner. Then, confirm that you will delete the app.

Now, download it from the app store all over again.


Tip 3: Check your iPhone storage

Apps may stop downloading owing to space constraints as well. So, you should keep an eye on the available space on your iPhone.

You can head to ‘Settings’ and then ‘General’. Now, move to ‘About’ to check the detailed information. If you are looking to delete the unwanted apps as well, you need to follow these steps.

Settings -> General -> Usage -> Manage storage and then look for the app you want to delete and then hit ‘Delete app’.Sponsor ads:Best Torrent Search Engine Sites to Find Your Favorite Torrents


Tip 4: Check Wi-Fi connections

You also need to check the Wi-Fi connection as well, your data network is not stable, you have to download the apps over your Wi-Fi connection. So, you can either restart your network or even connect to another Wi-Fi network if available. See if this works out. Try re-downloading the app.


Tip 5: Sign out of app store

When nothing else seems to work, you can try signing out of the app store and see if it fixes the issue. This also stops all current downloads and then you can resume the download again. Here are the steps you need to follow.


Head to ‘Settings’ on your iPhone.


Now, move to ‘iTunes and App store ‘and then tap on the ‘Apple ID’.


Now, you need to sign out from the popup menu which comes up.


Now, in the field that comes up, sign in using a different Apple ID.


Tip 6: Close background apps

While there is no official proof, it has often been seen that sometimes closing the background apps can lead to solving of the problem. So, you should double press the home button and then flick away the apps to remove them. Now, the iPhone should have enough free space and the app may resume downloading.


Tip 7: Still having this trouble? Fix your iOS system

If the problem still persists, you can try to download iMyFone D-Back iOS System Recovery and see if the tool can fix the problem. It is one of the smartly designed tools that comes packed with too many features. We will familiarize you with what this tool can do to give you an idea regarding why you too should opt for it.

What is Converter.Asimkt.com?

What is Converter.Asimkt.com?

Converter.Asimkt.com is an online platform which is used to convert files from HEIC to JPG. It is free and straightforward to use. What you have to do is go to this website, and tap on SELECT A FILE to select a HEIC image. Tap CONVERT to start the conversion.


Key Features:


Easy to use.


Conversion will be done online without downloading any software to computer.


It doesn't compromise the quality of converted files.
Cons:

Also Read:Set a Voice Recording as a Ringtone on iPhone Xs/X/8/7/6s

Also Read:Blogging Apps for iPhone and iPad to Start Your Blog

Conversion is done online and the converted JPGs are stored in their cloud server first. There is no “delete” button to clear the photos from their cloud server. It’s not safe if you convert private photos.


You have to download the encoded photos from cloud server to your computer.


It only supports to convert HEIC one at a time. Batch conversion is not available.


It’s slow to convert. (Generally, a photo will take more than 10s to convert. If your internet is not good, it may take half a minute.)
Also Read:Remove the U2 Album from iPhone in 2019
Also Read:5 Best Video Joiner Free for MP4 2018

Sponsor ads:

Gihosoft Free iPhone Data Recovery:https://www.gihosoft.com/iphone-data-recovery-free.html

Gihosoft iPhone Data Recovery Free

Free iPhone Data Recovery Software for Windows/Mac

Recover up to 12+ types of files, including contacts, SMS, photos, WhatsApp, Viber, notes, etc.

Restore lost data from iOS devices directly or from iTunes and iCloud backup

Recover iPhone data lost due to iOS upgrade/jailbreak, accidental deletion, device lost or broken

Support all the latest iPhone, iPad and iPod Touch

Both Free and Pro version.

If you lost data after you updated to a new iPhone, you can always use Gihosoft iPhone Data Recovery to get the data back from the old iPhone or backup.You may also like: iphonerecovery.com

If you use android phones, please choose Gihosoft Android Data Recovery.

With Gihosoft Android Data Recovery, no longer afraid of data loss!

Must read:Youtube video downloader for pc

Gihosoft RePicvid Free Photo Recovery Software provides a free photo recovery software for windows to help users recover the deleted or lost photo for free.

Jihosoft Android Data Recovery: the best Android Data Recovery software for Windows and Mac to recover deleted contacts, messages, photos, videos, WhatsApp and etc from Android devices.Tips:How to transfer messages from iPhone to iPhone



jihosoft Free iPhone Data Recovery

How to Tell If Someone Blocked You on Instagram 2019

How to Tell If Someone Blocked You on Instagram 2019
Part 1. Find out if someone blocked you on Instagram

Here are some of the different ways which you can use to check if someone has blocked you.
1. Use unfollowgram

The preliminary step is to check the people who have unfollowed you in recent times. Unfollowgram is a new feature that helps you understand who has recently unfollowed you. If you can follow the person who has unfollowed you, it means they haven’t blocked you or else it would signify that you have been blocked.


2. Mentioning the user on Instagram

Even when someone blocks you, they can still see your comment. So, mention the user who you think may have blocked you by using “@” before their username. Doing this will make them respond to you and it might clear your doubts.


3. Follow the suspect

If you suspect that someone has blocked you, you should merely try to follow them. If you feel that tapping the follow button does nothing, it hints that you may have been blocked by the person.



These are some of the clear signs which can help you judge whether or not someone has blocked you.
Part 2. How to block someone on Instagram

Now, we will focus on the steps to help you actually block someone on Instagram. These simple steps will help you out.


Head to the profile of the user who you want to block


On the top right corner, you will find three little dots. Tap on them


You will find a list of options on the bottom of your screen. Click on ‘block’ and then hit ‘confirm’ when you want to really block that user




That's it. Using these simple steps; you will be able to block anyone without any hassles whatsoever.
Part 3. How to unblock someone on Instagram

Once you are done blocking, you may also be willing to know the steps which will help you unblock someone too. Let us see that too.


Visit the profile of the person you want to unblock


On the top right corner, tap on the three dots


In the option that is generated, click on ‘unblock’


You will get a pop up message to confirm your action. Click on ‘unblock’ again




Conclusion


So, these are the simple ways by which you can handle the blocking and unblocking feature in Instagram and even detect if someone has blocked you. Now that you know these steps, you can implement it as and how you want it.

Sponsor ads:

Gihosoft Free iPhone Data Recovery:https://www.gihosoft.com/iphone-data-recovery-free.html

Gihosoft iPhone Data Recovery Free

Free iPhone Data Recovery Software for Windows/Mac

Recover up to 12+ types of files, including contacts, SMS, photos, WhatsApp, Viber, notes, etc.

Restore lost data from iOS devices directly or from iTunes and iCloud backup

Recover iPhone data lost due to iOS upgrade/jailbreak, accidental deletion, device lost or broken

Support all the latest iPhone, iPad and iPod Touch

Both Free and Pro version.

If you lost data after you updated to a new iPhone, you can always use Gihosoft iPhone Data Recovery to get the data back from the old iPhone or backup.You may also like: iphonerecovery.com

If you use android phones, please choose Gihosoft Android Data Recovery.

With Gihosoft Android Data Recovery, no longer afraid of data loss!

Must read:Youtube video downloader for pc

Gihosoft RePicvid Free Photo Recovery Software provides a free photo recovery software for windows to help users recover the deleted or lost photo for free.

Jihosoft Android Data Recovery: the best Android Data Recovery software for Windows and Mac to recover deleted contacts, messages, photos, videos, WhatsApp and etc from Android devices.Tips:How to transfer messages from iPhone to iPhone

jihosoft Free iPhone Data RecoveryAlso Read:Create Boomerang from Existing Videos on Android/iPhone 2019


Also Read:Rotate Video on Facebook 2019

How to Publish Podcast to iTunes

Podcasts can be seen as a cross between radio shows and a blog. It can be produced by virtually anyone with little outlay and only very basic knowledge of IT. If you want to publish a podcast, Apple’s iTunes is one of the best place for you. To publish a podcast on iTunes is very easy, and takes less time to get it up and running. Here is how you can do this:

Steps on How to Publish Podcast to iTunes

1 Sign in/Sign up for an Apple ID

Sign into your iTunes account using your Apple ID. If you are just new to the Apple world, you will need to create an Apple ID. To create an Apple ID, download the iTunes app from www.itunes.com and install the software. Click on the iTunes store option on the left screen to begin setting up your account. You can also visit Apple website to create Apple ID

2 Make a Podcast

Since you now have an iTunes account and have logged in to your account, you can now proceed to making either the video or audio for your podcast. After making the podcast, make sure you save it in a format that is supported by iTunes, such as, mp4, mov, m4v, mp3, m4a, and pdf or epub format for text.

Also Read:Voice Changing Apps & Software for Skype

Sponsor ads:Fix SD Card Error on GoPro Hero

3 Design the Podcast Cover Image

After the making of the podcast, create a 1400x1400 pixel image file in either PNG or JPG format in the RGB color. This image will be used as the album cover for your podcast. If you are to include any text on the album cover art, you should make it readable.

4 Upload the Podcast to Your Website

Host the audio or video file on your website before uploading the podcast to iTunes. You can use a WordPress or some other platforms to design your website, and some freeware FTP software to transfer files from your PC to the internet. To host the file, you can build a basic website that would tell prospective listeners a bit more about your podcast in general and more about the particular podcast show.

5 Generate an RSS Feed

To generate an RSS feed for your podcast, you can use various online RSS creation service, or create one yourself using a text editor for XML document creation.

6 Make an iTunes Feed

Once all your podcast has been added to your website, and you have associated them with the right label, then your RSS feed is almost ready. All that is needed for the RSS feed to be ready is for you to add some extra iTunes-specific information to the feed. Information like, your podcast category, and the location of your podcast cover image.

7 Upload Podcast to iTunes

To upload your podcast to iTunes, copy and paste the web address for your podcast RSS feed, and then click on validate. You will need to wait, so as to make sure that iTunes has received your podcast. A Feed preview will load if you do not have any validation errors. Visit the Validation error section if you have any problem with validating your podcast, and if everything within the Feed Preview is ok, click on the submit button to submit your podcast to iTunes.

After submitting your podcast, Apple will send you an email to notify you that your podcast is under review. It may take up to 10 days for your podcast to be approved. Once it has been approved, Apple will send you an email titled “iTunes Store Podcast Approved Notification” and will also include your own unique iTunes subscribe URLSponsor ads:

Gihosoft Free iPhone Data Recovery:https://www.gihosoft.com/iphone-data-recovery-free.html

Gihosoft iPhone Data Recovery Free

Free iPhone Data Recovery Software for Windows/Mac

Recover up to 12+ types of files, including contacts, SMS, photos, WhatsApp, Viber, notes, etc.

Restore lost data from iOS devices directly or from iTunes and iCloud backup

Recover iPhone data lost due to iOS upgrade/jailbreak, accidental deletion, device lost or broken

Support all the latest iPhone, iPad and iPod Touch

Both Free and Pro version.

If you lost data after you updated to a new iPhone, you can always use Gihosoft iPhone Data Recovery to get the data back from the old iPhone or backup.You may also like: iphonerecovery.com

If you use android phones, please choose Gihosoft Android Data Recovery.

With Gihosoft Android Data Recovery, no longer afraid of data loss!

Must read:Youtube video downloader for pc

Gihosoft RePicvid Free Photo Recovery Software provides a free photo recovery software for windows to help users recover the deleted or lost photo for free.

Jihosoft Android Data Recovery: the best Android Data Recovery software for Windows and Mac to recover deleted contacts, messages, photos, videos, WhatsApp and etc from Android devices.Tips:How to transfer messages from iPhone to iPhone

jihosoft Free iPhone Data Recovery

Fix Caller ID not Working in iOS 11 (iOS 12/11.4/11.3 Included)

6 Tips to Fix Caller ID not Working in iOS 11 (iOS 12/11.4/11.3 Included)
1. Update Carrier Settings

The first biggest reason behind the caller ID stopped working problem can be outdated carrier settings. Make sure to update your carrier settings in order to get rid of caller ID not showing in iOS 12/11 problem. Most of the times, you get the notification that there is an update available. And you are required to tap on "Update". However, if you have skipped this, you can check the update availability. To do this, simply follow the below-listed steps.


Go to "Settings" and tap on "General".


Now, go to "About" and then you will be able to find if any update will be available.


2. Call Your Carrier

In case the above method doesn’t prove fruitful in your situation, you should then try to call your carrier for assistance. It is because some carriers do charge for the Caller ID service i.e. showing or hiding the caller ID, so make sure if you have a paid service or not, and also check if the service is activated or disabled. What's more, check with them if any service outage is halting your service.
3. Set Correct Date and Time in Settings

When the caller ID is not working in iOS 12/11, try setting the appropriate date and time in your device. For this, just head to "Settings" > "General" > "Date & Time" > "Set Automatically" and turn it on.


4. Reset Network Settings

Resetting the network settings may help you when caller ID not showing in iOS 12/11 problem occurs if the above solutions didn’t work. For this, the steps are given below.


Open "Settings" and go to "General".


Now, tap on "Reset" and then "Reset Network Settings".


After this, enter the passcode and confirm resetting by clicking again on "Reset Network Settings".


5. Check If the Person Calling Disabled 'Show My Caller ID'

If caller ID is not showing after update to iOS 12/11, there could be a problem on the other end. Chances are that the person who calls you has disabled "Show my Caller ID" option. Therefore, ask that person to look over this thing by going to "Settings" > "Phone" > "Show My Caller ID", and turn it on if it is off.


6. Fix Caller ID not Working in iOS 12/11 without Data Loss (iOS 12/11.4/11.3 Included)
Also Read:Set a Voice Recording as a Ringtone on iPhone Xs/X/8/7/6s
Also Read:Blogging Apps for iPhone and iPad to Start Your Blog

The Truth behind iTunes Sync – Sync iPhone iOS 12

The Truth Behind iTunes Syncing

With iTunes, you can sync certain kinds of files, such as songs, playlists, tones, albums, TV shows, movies, books, audiobooks, podcasts, photos, videos, calendars, contacts, and your backups.
What Does iTunes Sync Do?

When you sync your iPhone with iTunes, it will attempt to make all of the data in your iTunes library and on your iPhone the same. It does this by basically replacing the content that is on your iPhone with the content that is in your iTunes library. This can end up erasing some of your iPhone data, especially if the files were not purchased from the official iTunes store.

When you turn on iTunes syncing, your content will from then on automatically sync when you connect your iPhone to your computer while iTunes is open. You have to turn off syncing if you don’t want this to happen automatically.Sponsor ads:how to remove cydia
Must Read:If you lost data after you updated to a new iPhone, you can always use Gihosoft iPhone Data Recovery to get the data back from the old iPhone or backup.

Gihosoft Free iPhone Data Recovery:iphonerecovery.com

If you use android phones, please choose Gihosoft Android Data Recovery




How to Sync Music to iPhone with iTunes Using USB

Generally, we can sync iTunes music to iPhone using a simple USB connection.


Launch iTunes and connect your iPhone with your USB cable.


Click on the device tab at the top left corner on iTunes and click it.


Look for the “Music” category at the left sidebar.


Check the box next to where it says “Sync Music”.


You can tick “Entire music library” or tick “Selected playlists, artists, albums, and genres” to sync some specific songs.


Click on “Sync” button once done.






How to Sync Music to iPhone with iTunes Using Wi-Fi

You can also use a WIFI connection to sync your music:


Connect your iPhone to your computer with a cable.


Open iTunes, and click where your iPhone.


Go to the Summary area and tick the box next to “Sync with this [your device] over Wi-Fi."


Click Apply. Unplug your iPhone.


Select what you want to sync, and then click Sync.



Note: when your iPhone and computer are in the same Wi-Fi network, your iPhone will appear in iTunes.
What to Do If You Can’t Set iTunes to Sync over Wi-Fi


Reboot your computer and restart your iPhone.


Make certain that both your computer and iPhone are attempting to sync over the same network. Check the SSID of your network in your device’s WIFI settings and be sure they match the network your computer is connected to.


Make sure that there is no firewall that is blocking the communication. Particularly, TCP ports 123 and 3689, as well as UDP ports 123 and 5353, should be open.




How to Fix “iPhone Won’t Sync with iTunes”

If iTunes syncing still doesn’t work, you might consider authorizing your computer. You can do this by:


Launch iTunes on your computer where you want to sync.


Go to “Account > Sign In” at the top of iTunes window and sign into your Apple ID.


Go to Account > Authorizations > Authorize This Computer on the menu bar.


Put in your password, then click Authorize.



After that, you should be authorized to transfer files to and from that computer.




What Does "iPhone is synced with another iTunes library" Mean?



If you try to sync iPhone to new computer, you might run into the message "iPhone is synced with another iTunes library. Do you want to erase this iPhone and sync with this iTunes library.” Basically, what this means is that you have previously synced your iPhone with another iTunes library, and the software is warning you that if you sync it with a new library, you could lose this data.

Everything that was previously in your iPhone library will be lost, and you will only have the contents of the new library on your iPhone after the sync. Be careful when you see this message, and considering syncing in a different way if you have songs that you don’t want to lose.

Best Way to Transfer CD Music to iPhone without iTunes 2019

1. Rip CD Music Before Transferring CD to iPhone

Step 1: Put a CD into your computer’s CD tray.

Step 2: Launch iTunes.

Step 3: Click the CD button (it looks like a little disk up top).



Step 4: iTunes will ask you if you want to import the CD. If you want to put all the songs from the CD into the iTunes library, say “Yes”.



Step 5: From there, you can select individual songs and click “Import CD” when you’re ready.



Step 6: Select your import settings and hit “OK”. You can choose the AAC Encoder, MP3, or others. Hit “OK” once you make the selections.



Step 7: Let iTunes rip the songs for you. It will tell you when it’s done.
2. How to Transfer CD to iPhone without iTunes - iOS 12 Supported

Sponsor ads:

Jihosoft iPhone Data Recovery:https://www.jihosoft.com/recovery/ios-data-recovery.html

Jihosoft iPhone Data Recovery

Free iPhone Data Recovery Software for Windows/Mac

Recover up to 12+ types of files, including contacts, SMS, photos, WhatsApp, Viber, notes, etc.

Restore lost data from iOS devices directly or from iTunes and iCloud backup

Recover iPhone data lost due to iOS upgrade/jailbreak, accidental deletion, device lost or broken

Support all the latest iPhone, iPad and iPod Touch.

Tips:

How to transfer messages from iPhone to iPhone

Gihosoft Free iPhone Data Recovery:https://www.gihosoft.com/iphone-data-recovery-free.html



Gihosoft iPhone Data Recovery Free